How to Make a Lace Wig Part Look Like Your Scalp
The three things that give a part away, the shade rule most people get wrong, and five steps to fix it.
To make a lace wig part look like your scalp, hide two things — the knots and the lace grid around them — then match the colour to your skin tone. Most fake-looking parts fail on one of those three, not on the wig itself.
You can buy an expensive HD unit and still have a part that looks like mesh. Here’s what is actually happening, and how to fix it in minutes.
The three things that give a part away
Dark knots
- Tiny dots where each hair is tied
- Most obvious on dark hair
The lace grid
- Mesh holes between the knots
- Shows under bathroom light and on camera
The wrong colour
- Too light or too pink
- Draws the eye straight to the part
The shade rule most people get wrong
Match your part to your skin tone, not your scalp — the same logic as matching lace to skin. And when you’re between two shades, choose the lighter one. Concealer applies lighter than it looks in the tube, and you can always deepen it by blending in a second shade.
Most of our customers mix two shades to create their own colour. See the Shade Blend Guide.
5 steps to a part that reads as scalp
- Decide where your part lives — middle, side or free-part. Treat only the lace in the parting space, not the hairline or edges.
- Turn the unit inside out. You are working on the underside of the lace.
- Melt the concealer with the Kugel™ Melter, freshly boiled water, or a blow dryer.
- Apply thin and flat. One thin layer pressed into the grid along the part. Thin layers stay put; thick layers can flake.
- Check in daylight and on camera. Part it and look on your phone. Too light? Blend in a touch of the next shade.
Foundation colours the lace. A grid knot concealer fills it.
Why not just use makeup?
Foundation only colours the lace. It doesn’t fill the grid, so the mesh texture still shows up close, and makeup made for skin can rub or sweat off. The Lace Wig Grid Knot Concealer covers the grid and the knots together, which is why the part reads as skin instead of tinted mesh.
Quick fixes if your part still looks off
| What you see | What’s happening | Fix |
|---|---|---|
| Shiny part | Applied too thick | Wash off with very warm water and soap; reapply thinner |
| Grey-looking part | Shade too light for your skin | Blend in the next shade |
| Part sits in the wrong place | Treated strip too narrow | Treat a slightly wider strip of lace |
Always check your part on your phone camera before you leave the house. The camera shows the grid long before a mirror does.
Questions we get asked
Should my concealer match my scalp or my skin?
Your skin tone. It is the same rule as matching lace to skin. When in doubt, go one shade lighter.
Do I need to treat the hairline too?
No. The concealer is for the parting space. Lay your hairline and edges the way you normally do.
Will it work on a free-part wig?
Yes. Treat a slightly wider strip of lace so you can move the part.
How do I take it off?
Wash with very warm water and soap, keep cold water off the unit until the product has melted off, then shampoo and condition.
Your part, but make it scalp.
Find your shade in two minutes, then blend to your exact tone.
Keep reading
We don’t fold. We build.