Skip to content
KugelTM Melter — Tool Only
Perfect Line Swiss

KugelTM Melter — Tool Only

USD 39.99

251 in stock

Description

The Kugel™ Melter applies controlled heat to melt The Lace Wig Grid Knot Concealer into a smooth, ready-to-apply paste so every application is effortless, seamless, and undetectable.

Scoop from your existing tube or palette. Melt. Glide onto lace. Done.

The Kugel Melter is now available on its own. You do not need the full kit to get the full result.
• Include: USB Cable

WHY YOU NEED IT

✦ Consistent heat — no boiling water, no blow dryer, no guessing

✦ Works with your tube scoop directly from any Perfect Line Swiss tube

✦ Custom blends mix two shades for your perfect match

✦ Less waste  use exactly what you need, nothing more

✦ Salon finish at home seamless, natural-looking scalp every time

Designed exclusively for The Lace Wig Grid Knot Concealer by Perfect Line Swiss.

Safety & Care

⚠️ Product and device become hot during operation.

• Do not leave the device plugged in for more than 20 minutes
• Do not use near water or in humid environments
• Always unplug after use
• Allow unit to cool completely before handling or storing
• Do not touch melted product directly with fingers
• Keep out of reach of children
• For external cosmetic use only

WARNING

Hot when in use. May cause burns if improperly handled. Do not touch melted product directly. Do not leave device plugged in for more than 40 minutes. Do not use near water or in humid environments. Always unplug after use and allow unit to cool completely before storing. Keep out of reach of children.

Disclaimers

Electrical Safety

Use with appropriate electrical outlets only. Do not modify the device or use damaged cords. Unplug after use. Not suitable for continuous operation exceeding 40 minutes.

Storage Conditions

Store in a cool, dry place away from heat, direct sunlight, or humid environments. Allow device and product to cool completely before storing.

Warranty Limitation

Perfect Line Swiss warrants that this product is free from manufacturing defects at shipment. Misuse, improper handling, or modifications void the warranty. Product intended for cosmetic use only; no other guarantees are expressed or implied.

Not A Medical Or Cosmetic Treatment

This product is not a medical device and does not provide medical, dermatological, or therapeutic results. Intended for cosmetic wig application use only.

Results May Vary

Outcomes may differ based on lace type, skin tone, application technique, and environmental conditions.

Device Specifications

Size / Diameter Dimensions: 23 cm

Voltage: 110–120 V (North America) | 220–240 V (EU)
Frequency: 50/60 Hz
Power: 8 W
Maximum Temperature: 135°C
Electrical Class: Class II
Certifications: CE • EMC • LVD • FCC

Using the Kugel Melter in The USA

The Kugel Melter runs on standard USB power (5V), so it works with any USB wall adapter — but not all chargers are created equal. Many phone chargers only supply 1A–2.4A, and in some parts of the US home electrical current can be inconsistent. Either of these can cause the Kugel Melter to lose heat mid-use, even though it’s still powered on.

To keep it melting steadily, always plug the included USB cable into a wall adapter rated 5V / 3A (15W) or higher — see “Choosing The Right Adapter” below for what to look out for.A 5V/3A USB wall charger is available at Walmart, Target, Best Buy, or on Amazon. Search “5V 3A USB wall charger” to find one

The USB cable included with your Kugel Melter does not need to be replaced, only the wall adapter, if yours is rated lower than 3A.

Using the Kugel Melter in the UK or Europe

The Kugel Melter works perfectly worldwide. Because it runs on USB power (5V), you simply need to plug the included USB cable into a local USB wall charger rated 5V / 3A (15W). Do not use a plug-shape adapter with your North American charger — always use a local charger bought in the country you’re in.

A 5V/3A USB charger is available at any supermarket, pharmacy, or electronics store in the UK and across Europe. Search “5V 3A USB wall charger” on Amazon UK or Amazon.de.

  • UK & Ireland: Look for a Type G plug charger
  • Europe (Germany, France, Spain, Italy, Netherlands, and most other countries): Look for a Type C / Type E / Type F plug charger

The USB cable included with your Kugel Melter does not need to be replaced — only the wall charger. See “Choosing The Right Adapter” below for what to look out for.

Choosing The Right Adapter: What To Avoid

Many wall chargers today are “fast chargers” built for phones and laptops, often labeled USB-C PD, PPS, or Fast Charge. These chargers are designed to output several different voltages (5V, 9V, 12V, 15V, 20V, and more), switching between them based on what the connected device requests.

The Kugel Melter isn’t designed to “negotiate” with this type of charger the way a phone does. Even if 5V/3A is listed as one of several settings on the label, a multi-voltage fast charger can deliver unstable or inconsistent power to the Kugel Melter instead of a clean, steady 5V. This can cause the indicator light to turn on while the unit stays cold, or cause it to lose heat and stop working after only a few uses.

To avoid this, always use a plain, dedicated 5V/3A (15W) USB wall charger, not a fast-charging or multi-voltage one.

Correct: the label shows only one output 5V⎓3A (or 5V/3A, 15W) — and nothing else.
Incorrect: the label lists several voltages (5V, 9V, 12V, 15V, 20V, or a range like 3.3–21V PPS), or includes markings like “PD,” “PPS,” or “Fast Charge.”

If you’re ever unsure whether your charger is the right type, feel free to send us a photo of the label and we’ll confirm before you use it.

Complete your install

Made to work together

KugelTM Melter — Tool Only

USD 39.99

Add to cart